Assembling hydrodynamic cloaks to conceal complex objects from drag

Transformation hydrodynamics and the corresponding metamaterials have been proposed as a means to exclude the drag force acting on an object. Here, we report a strategy to deploy the hydrodynamic cloaks in a more practical manner by assembling different-shaped cloaking parts. Our strategy is to first model a square-shaped cloak and a carpet cloak and then combine them to conceal a more complex-shaped space in the three-dimensional hydrodynamic flow. With the derivation of transformation hydrodynamics, the coordinate transformations for each hydrodynamic cloaking are demonstrated with the calculated viscosity tensors. The pressure and velocity fields of the square, triangular (carpet), and exemplary three-dimensional house-shaped cloaks are numerically simulated, thus showing a cloaking effect and reduced drag. This study suggests an efficient way of cloaking complex architectures from fluid-dynamic forces.     

卫星振动对星间光码分多址系统性能的影响

卫星振动是影响星间光CDMA通信系统性能的一个重要因素.考虑多用户干扰、背景光噪音、热噪音、接收机噪音和卫星振动,给出了基于PPM信号格式的星间二维光CDMA通信系统的系统模型.采用数值分析的方法,详细分析了卫星振动对该系统误码率性能的影响.结果表明,码速率、通信波长和卫星振动都会影响星间二维光CDMA通信系统的误码率性能.当卫星振动标准偏差σ≤4×10－7时,卫星振动对系统误码率性能的影响较小；当卫星振动标准偏差σ≥1.2×10－6,卫星振动对系统误码率性能的影响很大,得到的误码率难以满足系统的通信要求,需要采用卫星振动抑制或补偿等技术提高星间二维光CDMA通信系统的误码率性能.     

Study of asymmetric charge writing on Pb(Zr,Ti)O3 thin films by Kelvin probe force microscopy

Polycrystalline Pb(Zr_0.55Ti_0.45)O₃ thin film was deposited on Pt/Ti/SiO₂/Si(1 0 0) by radio-frequency-magnetron sputtering method, and the writing of charge bits on the surface of PZT thin film was studied by Kelvin probe force microscopy. It is found that the surface potential of the negative charge bits are higher than those of the corresponding positive ones. When ferroelectric polarization switching occurs, the potential difference becomes even more remarkable. A qualitative model was proposed to explain the origin of the asymmetric charge writing. It is demonstrated that the internal field in the interface layer, which is near the ferroelectric/electrode interface in ferroelectric film, is likely to be the cause for the occurrence of this phenomenon.     

温度/应变/扭曲三参量同时测量低成本传感系统

提出了一种利用布喇格光纤光栅反射光作信号源、高频CO2激光脉冲写入的长周期光纤光栅和超周期光纤光栅作传感器实现温度、应变和扭曲同时测量的全光栅型低成本强度解调传感方案.文中利用长周期光纤光栅边缘滤波效应实现了温度、应变和扭曲传感信号的实时解调.实验结果表明，其温度和应变的测量灵敏度分别为－0.211 dB/℃和－0.012 dB/10με；而扭曲率的测量灵敏度为0.4394 dB/(rad·m－1)，是该法写入普通LPFG的4倍以上.     

左手介质椭圆光波导基模传播特性

在椭圆柱坐标系中，采用分离变量方法，得出了左手介质椭圆光波导本征方程的近似解，通过数值计算，分析了椭圆波导偏心率、左手介质的电容率、磁导率对椭圆光波导基模传播特性的影响，并将左介质光波导与右手介质光波导基模特性进行对比，得出左手介质光波导的基模特性与右手介质光波导基模特性差别不大的结论.     

The Calibrating Theory in the Network Parameters Measurement of Microwave and MMW Devices

The paper introduces a special system calibration technology in s-parameters measurement of microwave and millimeter wave devices. The 8-term errors module is built by analyzing the signals flowing in the measurement system. Then the calibration technology using non-standard kits is designed on the base. Finally, the experiment using the calibration technology is introduced.     

外FO-群

如果群 G 的所有真商群都是 FO-群,但是群 G 本身不是 FO-群,则称 G 为外 FO-群,本文将给出外 FO-群完全的结构描述．     

幅相一致行波管高频电路CAD研究

 在行波管的设计和装配过程中，各部件的尺寸必须严格控制，高频电路参数的离散对行波管色散特性有极大的影响。使用螺旋导电面模型，模拟计算了高频结构各主要参数离散对色散特性和轴向互作用耦合阻抗的影响。分析计算了夹持杆宽度、翼片高度、螺旋线平均半径、螺距、夹持杆介电常数等离散时对色散特性和轴向互作用耦合阻抗的影响，为新型幅相一致行波管的设计和生产提供了很有价值的参考建议。     

Retailer’s optimal pricing and lot-sizing policies for deteriorating items with partial backlogging

Pricing is a major strategy for a retailer to obtain its maximum profit. Therefore, in this paper, we establish an economic order quantity model for a retailer to determine its optimal selling price, replenishment number and replenishment schedule with partial backlogging. We first prove that the optimal replenishment schedule not only exists but also is unique, for any given selling price. Next, we show that the total profit is a concave function of p when the replenishment number and schedule are given. We then provide a simple algorithm to find the optimal selling price, replenishment number and replenishment timing for the proposed model. Finally, we use a couple of numerical examples to illustrate the algorithm.